GE Druck ADTS 2 Series

21 Druck ADTS 2XX User Manual
K0451 Issue No. 1
Select Test Sequence File
Files stored in the computer
1. From the main menu, select Custom Test
Sequence File.
2. Use the Up and Down keys to highlight the test
file.
3. Use the SELECT key to load the file.
4. Press MAIN MENU to return to the Main Menu
Screen.
Selecting a Test Sequence
1. From the main menu, select the Custom Test Sequence File. The screen changes to the selected test
screen with the data table from the file.
2. Use the touch screen keys to select each test procedure value.
3. After selecting the test procedure value use the Control/Leak Measure key to select CONTROL.
4. The screen changes to CONTROL MODE and shows the actual measurement and rate.
Measure/
Control
Actual rate of
pressure
Actual
channel
readings
Set of aim
values to be
used in control
mode
Only available
in Control Mode
changes to Rate Timer
in Leak/Measure Mode
Rate aim to be
used in this TP
step.
Title
Test
procedure
step