GEK-106310AB F650 Digital Bay Controller 5-121
5 SETTINGS 5.6 INPUTS/OUTPUTS
5
5.6.3.2 INPUT STATUS SIGNALS
Actual > Inputs/Outputs > Contact inputs > Board X (being X the corresponding board in each case). Depending on the
I/O board, inputs are represented as follows:
Table 5–102: CONTACT INPUTS STATUS
The operation logic for supervision signals (board type 2) is detailed in section 5.6.5 in this manual.
INPUT STATUS
(X: BOARD F, G, H, J)
MIXED AND ANALOG BOARD
(TYPES 1 AND 5)
SUPERVISION BOARD
(TYPE 2)
32 DI
(TYPE 4)
CONT IP_X_CC1 CC1 CC1 CC1 CC17
CONT IP_X_CC2 CC2 CC2 CC2 CC18
CONT IP_X_CC3 CC3 CC3 CC3 CC19
CONT IP_X_CC4 CC4 CC4 CC4 CC20
CONT IP_X_CC5 CC5 CC5 CC5 CC21
CONT IP_X_CC6 CC6 CC6 CC6 CC22
CONT IP_X_CC7 CC7 CC7 CC7 CC23
CONT IP_X_CC8 CC8 CC8 CC8 CC24
CONT IP_X_CC9 CC9 Va_COIL1 CC9 CC25
CONT IP_X_CC10 CC10 Vb_COIL1 CC10 CC26
CONT IP_X_CC11 CC11 Va_COIL2 CC11 CC27
CONT IP_X_CC12 CC12 Vb_COIL2 CC12 CC28
CONT IP_X_CC13 CC13 O7_SEAL CC13 CC29
CONT IP_X_CC14 CC14 O8_SEAL CC14 CC30
CONT IP_X_CC15 CC15 SUP_COIL1 CC15 CC31
CONT IP_X_CC16 CC16 SUP_COIL2 CC16 CC32
To Next Page
Loading...
