GE FP1/4200 User Manual

L
* Hold Cover by Fooa Chute with Latching Tab facmg you {J). The Food
Chute can be used as a handle
* Tilt front edge of Cover downward and fit Latching Tab mto Slot at top
of Bowl (J). Be sure Tab fits into Slot.
FOOD CHUTE
COVER
LATCHING SLOT
TILT COVER
DOWNWARD
PIN
OPENING
a·
* L 1wer back of Cover to allow Latch Pin to fit into Pin Opening at top of
Base (K).
* Press Latch Pin down into Pin Opening until it clicks into place.
* T· remove the Cover. shut Food Processor OFF and make sure Disc
and/or Knife Blade has stopped rotating. Press Cover Release Knob to
the r ght~(L) and lift off Cover.
a
5. Food Pusher
* Insert Food Pusher into Food Chute and
lower mto place (M). Always use Food Push-
er to guide food through Reversible Disc
during shredding or slicing, and to prevent
spattering out of Food Chute when proces-
sing
with Knife Blade.
10
m
.; .

GE FP1/4200 Specifications

General

Brand	GE
Model	FP1/4200
Category	Food Processor
Language	English