D
IRECTION 5813707-100, REVISION 2 VENUE GO™ SERVICE MANUAL
3-38 Chapter 3 - System Setup
PRELIMINARY
Section 3-8
Connectivity Setup
NOTE: If connected to a stand-alone network (Peer-to-Peer network with a Venue Go™ scanner, and an
optional network printer), you should use default delivery settings.
3-8-1 Introduction
To be able to use the network functions when connected to a hospital network, the Venue Go™ must
have a proper network address.
• Before you can set up the Venue Go™ , you need to collect some information.
• The Worksheet (see sample Connectivity Installation Worksheet on page 2 - 13) can be used for
gathering this information.
• Typical source for this information is the network administrator.
To Next Page
Loading...
