GE H45601VG - Chapter 10 Care and Maintenance

D
IRECTION 5813707-100, REVISION 2 VENUE GO™ SERVICE MANUAL
Chapter 10 - Care and Maintenance 10-1
PRELIMINARY
Chapter 10
Care and Maintenance
Section 10-1
Overview
10-1-1 Periodic Maintenance Inspections
Having been determined by engineering that your Venue Go™ system has no high-wearing
components likely to fail due to use, therefore Periodic Maintenance Inspections are not mandatory.
However, some Customer Quality Assurance Programs may require additional tasks and/or inspections
to be performed at periods of frequency different from those listed in this manual.
10-1-2 Purpose of Chapter 10
This chapter describes the Care and Maintenance (PM) procedures for the Venue Go™ ultrasound
scanner and its peripherals. These procedures are intended to maintain the quality of the Ultrasound
system’s performance.
Read this chapter completely and familiarize yourself with the procedures before performing a task.
Table 10-1 Contents in Chapter 10
Section Description Page Number
10-1
Overview
10-1
10-2
Warnings
10-2
10-3
Why Perform Maintenance Procedures?
10-3
10-4
Tools Required
10-5
10-5
System Maintenance
10-6
10-8
Electrical Safety Tests
10-15