D
IRECTION 5813707-100, REVISION 2 VENUE GO™ SERVICE MANUAL
Chapter 3 - System Setup 3-43
PRELIMINARY
4.
• Select DicomWorklist.
• From the IP-address pull-down
menu select the required Worklist
Server.
It is not possible to change the setting in
the IP-Address field by editing it.
To change the IP-Address settings:
• Enter the DICOM server’s AE Title.
This entry is case sensitive and
must match exactly.
• Enter the DICOM server’s Port.No
(Port Number).
• For some DICOM Servers, the
default Time-out setting (30) is too
low.
• Select OK to close the Worklist
properties dialog and save changes
5.
• To add the new IP-address, click
the Plus button.
• In the Server Config window, tap to
select and edit the IP-address
details.
• Tap OK to save the configuration.
• The new IP-address is added to the
IP-address pull-down menu.
6.
• To delete the IP-address from the
list, tap to open the pull-down menu
and select the required IP-address.
• Tap the Minus button. The selected
IP-address is deleted.
Table 3-21 DICOM Server IP Address on the Venue Go™ (Continued)
Step Instruction Illustration
To Next Page
Loading...
