GE JT5000 - Meat Probe

35
GE Title or job number
11/26/2013
Meat probe - Machine control only F40 & F41
Upper oven board pin 3 to 4
O/W to GN should be 30k-50k Ω
with probe installed. Open, (∞),
circuit without probe installed.
Lower oven board pin 3 to 4
O/W to GN should be 30k-50k Ω
with probe installed. Open, (∞),
circuit without probe installed.
F40 - Upper meat probe circuit shorted
F41- Lower oven meat probe circuit shorted. Checks are below. If any other resistance in circuit,
replace meat probe harness and receptacle.