GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4) 8-19
8-3-8-3 Matrox for CRT (Resolution setup)
For CRT Monitor System ONLY:
1.) Drag and drop the taskbar into the desktop.
2.) Click on << in the task tray to show the MatroxPowerDesk-SE icon.
3.) Right-click on MatroxPowerDesk-SE icon to show the popup menu.
Figure 8-127 Drag and Drop Task bar
Figure 8-128 Click on << icon
Figure 8-129 Click on MatroxPowerDesk-SE
To Next Page
Loading...
