GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4) 8-23
8-3-8-4 Hardware Device Check:
1.) On the windows desktop, left-click on My Computer, then right-click on Properties.
2.) The System Properties window appears. Select Hardware > Divice Manager...
3.) Verify that X or ! is not displayed.
Figure 8-135 My Computer Properties
Figure 8-136 Divice Manager Check
NOTICE
The Eusc (Mlultifunction adapters > Eusc) might contain “!” mark, but it is no problem. Skip any of
device driver installation procedures described below.
“!” mark on Eusc is no problem.
To Next Page
Loading...
