GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4) 8-51
8-3-10-6 Regional Setup (For the system with language other than English ONLY) (cont’d)
For Russian or Greek Languages
1.) In Utility--> System--> General, set the Language as Russian or Greek. Save this setting, but do
not reboot the system yet.
2.) Press Regional Options, under Standards and Formats select Russian or Greek, under Location
select Russia or Greece. Press Apply.
Figure 8-171 Russian or Greek as Language
Figure 8-172 Selecting Russian or Greek
To Next Page
Loading...
