GE LOGIQ S6 User Manual

GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4) 8-59
8-3-10-8 Printer Registration (cont’d)
5.) Verify that the user defined printer is added in Printflow View.(Example shown: UP-D23MD)
6.) For UP-D23:
When upgrading to BT08, updated printer driver may be loaded and assigned. Before assigning
Print Button to Printer, check 'DEVICE' Tab for multiple UP-D23 Printer, and check for active printer.
7.) Right-click on Save.
Figure 8-181 Save
1. Verify
that the
user
defined
printer is
added.
2. SAVE.

GE LOGIQ S6 Specifications

General

Brand	GE
Model	LOGIQ S6
Category	Medical Equipment
Language	English