To Next Page

To Previous Page

1-4

04/03/2014

Mentor EM Portable Equipment User's Manual

Batteries

Only batteries (Lithium-ion) recommended and supplied by GE Inspection

Technologies may be used for instrument operation.

NOTE:

Internal batteries may only be replaced by a factory trained service center.

Opening the instrument case in an attempt to access the batteries will void the

instrument’s warranty. An externally connected battery pack is available from

suppliers as described in this manual.

NOTE:

When the instrument reaches the end of its life, the Lithium-ion battery must

be removed. Then properly dispose of the instrument and of the Lithium-ion

battery.

Power plug

Class 1: For AC line powered equipment the power plug may only be inserted

into a grounding-type receptacle. Any disconnection or interruption of the

protective conductor may make the instrument unsafe. When connecting

equipment with other devices, the protective conductors shall be made

equipotential.

Class 2: Use only the power cord and AC Power Adapter/Battery Charger

supplied by GE Inspection Technologies for this instrument. Serious harm to the

instrument is highly likely if the incorrect power supply is used.

ChargerSpecications

AC input to charger specication: 100–240 VAC, 47–63 Hz

DC charge input specication: 12 VDC ± 5%, 72 W

GE Mentor EM User Manual

Questions and Answers: