CHAPTER 5: MONITORING A3 POWER ANALYSIS
PQM POWER QUALITY METER – INSTRUCTION MANUAL 5–31
Switch Input C Alarm/Control Dropout SW C ACTIVE ↓
Switch Input D Alarm/Control Pickup SW D ACTIVE ↑
Switch Input D Alarm/Control Dropout SW D ACTIVE ↓
Pulse Input 1 Alarm/Control Pickup PULSE IN 1 ↑
Pulse Input 1 Alarm/Control Dropout PULSE IN 1 ↓
Pulse Input 2 Alarm/Control Pickup PULSE IN 2 ↑
Pulse Input 2 Alarm/Control Dropout PULSE IN 2 ↓
Pulse Input 3 Alarm/Control Pickup PULSE IN 3 ↑
Pulse Input 3 Alarm/Control Dropout PULSE IN 3 ↓
Pulse Input 4 Alarm/Control Pickup PULSE IN 4 ↑
Pulse Input 4 Alarm/Control Dropout PULSE IN 4 ↓
Totalized Pulses Alarm/Control Pickup PULSE TOTAL ↑
Totalized Pulses Alarm/Control Dropout PULSE TOTAL ↓
Current THD Alarm/Control Pickup CURRENT THD ↑
Current THD Alarm/Control Dropout CURRENT THD ↓
Voltage THD Alarm/Control Pickup VOLTAGE THD ↑
Voltage THD Alarm/Control Dropout VOLTAGE THD ↓
Main Analog Input Alarm/Control Pickup AN INPUT MAIN ↑
Main Analog Input Alarm/Control Dropout AN INPUT MAIN ↓
Alternate Analog Input Alarm/Control Pickup AN INPUT ALT ↑
Alternate Analog Input Alarm/Control Dropout AN INPUT ALT ↓
Self Test Failure Alarm Pickup SELF TEST ↑
Self Test Failure Alarm Dropout SELF TEST ↓
COM1 Failure Alarm Pickup COM1 FAILURE ↑
COM1 Failure Alarm Dropout COM1 FAILURE ↓
COM2 Failure Alarm Pickup COM2 FAILURE ↑
COM2 Failure Alarm Dropout COM2 FAILURE ↓
Clock Not Set Alarm Pickup CLOCK NOT SET ↑
Clock Not Set Alarm Dropout CLOCK NOT SET ↓
Critical Setpoints Not Stored Alarm Pickup PARAM NOT SET ↑
Table 5–1: List Of Possible Events (Sheet 3 of 4)
EVENT NAME DISPLAYED EVENT NAME
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
