GE Multilin PQM - 6.5 Using EnerVista PQM Setup; 6.5.1 Entering Setpoints

6–14 PQM POWER QUALITY METER – INSTRUCTION MANUAL
USING ENERVISTA PQM SETUP CHAPTER 6: SOFTWARE
6.5 Using EnerVista PQM Setup
6.5.1 Entering
Setpoints
The System Setup page will be used as an example to illustrate the entering of setpoints.
Z Select the
Setpoint > System Setup menu item.
The following window will appear:
When a non-numeric setpoint such as
CT WIRING is selected, EnerVista PQM Setup
displays a drop-down menu:
Courtesy of NationalSwitchgear.com