7–50 PQM POWER QUALITY METER – INSTRUCTION MANUAL
MODBUS MEMORY MAP CHAPTER 7: MODBUS COMMUNICATIONS
EVENT
RECORD
continued
0B2A Record #N Ia THD --- --- 0.1 x % F1 N/A
0B2B Record #N Ib THD --- --- 0.1 x % F1 N/A
0B2C Record #N Ic THD --- --- 0.1 x % F1 N/A
0B2D Record #N In THD --- --- 0.1 x % F1 N/A
0B2E Record #N Van THD --- --- 0.1 x % F1 N/A
0B2F Record #N Vbn THD --- --- 0.1 x % F1 N/A
0B30 Record #N Vcn THD --- --- 0.1 x % F1 N/A
0B31 Record #N Vab THD --- --- 0.1 x % F1 N/A
0B32 Record #N Vbc THD --- --- 0.1 x % F1 N/A
0B33 Record #N Analog Input (high) --- --- --- F3 N/A
0B34 Record #N Analog Input (low) --- --- --- F3 N/A
0B35 Record #N Trace Memory Trigger Cause --- --- --- F41 N/A
0B36 Record #N Internal Fault Error Code --- --- --- F108 N/A
0B37 Reserved
to ↓ ↓ ↓ ↓ ↓ ↓
0B7F Reserved
Table 7–10: PQM Memory Map (Sheet 34 of 55)
GROUP ADDR
(HEX)
DESCRIPTION RANGE STEP
VALUE
UNITS and
SCALE
FORMAT FACTORY
DEFAULT
Notes:* Data type depends on the Command Operation Code.** Any valid Actual Values or Setpoints address.
*** Maximum Setpoint value represents “OFF”.**** Minimum Setpoint value represents “OFF”.
***** Maximum Setpoint value represents “UNLIMITED”.****** Applicable to older revisions with VFD display only
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
