CHAPTER 7: ACCESS USING RADIUS ACCESS USING RADIUS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 7–11
Ensure that the port which has the RADIUS server is force authorized and asserted. For
other ports (user ports), it is best to leave the Control on auto and Initialize on de-asserted.
To change the port access characteristics when authenticating with a RADIUS server,
Z Select the Configuration > Radius > Port > Access menu item.
The Quiet Period column represents the time, in seconds, the supplicant is held after an
authentication failure before the authenticator retries the supplicant for connection. The
value ranges from 0 to 65535 seconds, with a default of 60.
To Next Page
Loading...
Need help?
General
