– 34 –
Upper Oven Components
Door Assembly
WARNING: A microwave leakage test must be
performed any time a door is removed, replaced, or
adjusted for any reason.
Door Removal
CAUTION: Do not close the door beyond the door
removal position. Damage to the inner door panel
will occur.
To remove the door, open the door fully and insert
a door removal tool (Part #: WB01X10364) in each
door hinge opening. The door can then be slowly
closed a few inches to the door removal position
and lifted from the oven.
The door assembly comes complete including the
door removal tool.
Door Removal Position
(Continued next page)
To Next Page
Loading...
