GE S2020 - Page 240

GE Reason Switches
Chapter 8 – Monitoring
240
REASON SWITCHES-TM-EN-3
On the top of the web page can be selected which port is required. Information
shown is as follows:
o Total received frames at that port, including error frames. This
information is divided in all packets, all octets, all unicast, all
multicast, all broadcast and all Pause frames received;
o Total transmitted frames at that port, including error frames. This
information is divided in all packets, all octets, all unicast, all
multicast, all broadcast and all Pause frames transmitted;
o Total received frame size counter, which represents all frames
divided by its size. Shown values are 64-bytes frames to 1527-and-
above frames;
o Total transmitted frame size counter, which represents all frames
divided by its size. Shown values are 64-bytes frames to 1527-and-
above frames;
o Total Received Queue counters, in packets.
o Total Transmitted Queue counters, in packets.
o Total received error counters, in packets, which is divided in: Drop,
CRC/Aligment, Undersize, Oversize, Fragments, Jabber and Filtered.
o Total transmitted error counters, in packets, which is divided in:
Drop, CRC/Aligment, Undersize, Oversize, Fragments, Jabber and
Filtered.