o Automatic learning with auto-negotiation and detection/treatment
of polarity inversion in copper ports;
o Formation and automatic loop-based topologies control with STP
protocols (IEEE 802.1D): STP, RSTP and MSTP;
o Transfers only reliable packets (store-and-forward operation);
o Provides support to the VLAN (IEEE 802.1Q) with independent (IVL)
or shared (SVL) learning by hardware of up to 4,095 VLANs and
32,000 MAC addresses;
o Quality of service (QoS) ranking with 512 inputs and 8 priority lines
per port, with strict or weighted priority operation;
o Supports IPv4 and IPv6 in broadcast, multicast and unicast;
o Supports IGMP v2/v3 and MLD v1/v2;
o Detection and avalanche control in broadcast, multicast and
unicast.
Management
o Configuration in text mode on a safe connection (SSH);
o Configuration in graphic mode on a safe connection (SSL);
o Authentication and native or remote authorization (RADIUS and
TACACS+);
o Remote monitoring via RMON;
o Dedicated configuration settings port is an USB 2.0;
o Statistical data collection of use via internal agent.
SNMP v3
o Traffic mirroring for monitoring.
Highlights:
o T1000 switch modules change shall be done in technical field with
no need to send the equipment back to the factory;
Failsafe alarm relay
o Dry contact NO and NC;
o Indicates Ethernet communication loss or power supply failure.
Mounting options
o Removable fixation flap for a standard 19” rack and 1U tall;
To Next Page
Loading...
Need help?
General
