o T1000 model has DIN rail mounting support;
o T1000 model with interface connectors on the front panel or on the
rear of the chassis;
o S2020 and S2024G model with interface connectors on the rear of
the chassis;
Power Supplies
o Internal power supplies with redundancy;
o Nominal AC voltage range of 110 to 240 VAC;
o Nominal DC voltage range of 100 to 250 VDC;
o Nominal DC voltage range of 24 to 48 VDC;
o Redundant internal energy source.
Operating temperature
o -40 °C to +55 °C by natural convection (fanless).
Dimensions and Weight
o Physical dimensions (T1000): 4,3 cm (Height) x 43,6 cm (Width) x
28,6 cm (Depth);
o Physical dimensions (S2020 and S2024G): 4,3 cm (Height) x 43,6 cm
(Width) x 31 cm (Depth);
o Weight: approximately 5 kg.
Port types supported
o Copper Ethernet– 10/100/1000baseTX with RJ45 connector;
o Single-mode optic fibre – 1000baseFX with LC connector (SFP);
o Multi-mode optic fibre – 100baseFX with ST (only for T1000
switches) or LC connector.
Ports supported
o Copper interface module for Cat5e wires of 10/100/1000 Mbps
with auto-negotiation and detection/treatment of polarity
inversion;
o Optic interface module of 100 Mbps with double fibre (100baseFX,
ST connector, multimode fibre) (only for T1000 switches);
To Next Page
Loading...
