2-10 Transport Pro Revision A
2012659-042
Equipment Overview: Indicators
Alarm Light
Main Processor Diagnostic LEDs
The main processor PCB provides three diagnostic LEDs to help
troubleshoot the monitor. The LEDs are viewable on the back of the
monitor under the Ethernet connector.
Color Description
Yellow Flashes for warning patient status alarms and system status
alarms.
Red Flashes for crisis patient status alarms.
Color Description
Green There is communication with an acquisition device.
Flashing Green The monitor is running the Boot Loader program.
Yellow The main code is running.
Red The boot code is running.
607A
To Next Page
Loading...
