8-12 Transport Pro Revision A
2012659-042
Disassembly: FRU Replacement
Speaker
1. Remove the back plastic. See “Back Plastic Disassembly” on page 8-4.
2. Remove the display subassembly. See “Display Subassembly” on
page 8-7.
3. Remove the four screws holding the speaker onto the shield.
4. Disconnect the speaker harness from the shield.
5. Install the new speaker.
6. Connect the speaker harness.
7. Secure the speaker to the main processor PCB with the four screws
(PN 2000540-007).
8. Reinstall the main processor PCB. Be sure to reconnect the backlight
friction, keypad PCB and display friction connectors to the main
processor PCB.
9. Secure the main processor PCB to the display assembly with the four
screws (PN 2000540-007).
10. Assemble the back plastic. See “Back Plastic Assembly” on page 8-6.
634A
To Next Page
Loading...
