Chapter 5. Measurements
100 TransPort
®
PT900 User’s Manual
5.3.4 Displaying the Diagnostics Parameters
During operation, the PT900 measures various system parameters for the purpose
of analyzing the system performance. These system diagnostic parameters are
listed in the
DIAGNOSTICS measurement screen (see Figure 97 below). To access
this screen, click the icon at the top of the measurement screen.
After you have finished viewing the diagnostic parameters, click the appropriate
icon at the top of the screen to return to the measurement display.
Note: In the screen below, Channel 1 is active and Channel 2 is inactive. Also,
all the signal diagnostic parameters are within their normal range, as
indicated by the green check marks to the right of each parameter.
Figure 97: Diagnostics Measurement Screen
To Next Page
Loading...
