GE TransPort PT900 - Initial Settings; B.2 Initial Settings

Appendix B. Data Records
158 TransPort
®
PT900 User’s Manual
B.2 Initial Settings
The values for the parameter settings immediately after initial installation of the
meter and verification of proper operation should be entered in Table 19 below.
Table 19: Initial System Parameter Settings
Parameter Initial Value
Pipe OD
Pipe ID
Pipe Wall Thickness
Pipe Material
Pipe Sound speed
Lining Thickness
Lining Material
Transducer ID
Transducer Frequency
Transducer Wedge Type
Transducer Wedge Angle
Transducer Wedge SOS
Transducer TW
Traverses
Fluid Type
Fluid SOS
Fluid Minimum SOS
Fluid Maximum SOS
Fluid Temperature
Transducer Spacing