Chapter 2. Installation
TransPort
®
PT900 User’s Manual 41
2.7.3 Disposing of the Batteries
2.8 Powering On and Off
To operate the PT900, the power cord must be plugged into line voltage or the
battery pack must be charged as described in the previous sections.
CAUTION! Never dispose of the batteries by incineration. Do
not attempt to disassemble or short-circuit the batteries. For
safety, do not handle a damaged or leaking battery.
CAUTION! Be sure to dispose of your batteries properly. In
some areas, battery disposal in business or household trash may
be prohibited. For safe disposal options, contact your nearest GE
authorized service center.
CAUTION! For CE compliance, the PT900 is classified as a
battery-powered device, and it is not to be operated with the AC
power adapter connected. To comply with CE certification,
unplug the AC power adapter before operating the PT900.
WARNING! If the PT900 fails the backup battery test, you must
send the unit back to the factory for a battery replacement.
Make sure you keep the battery charged until you are ready to
ship the unit back to the factory. Before shipping, print out all of
the log and site data, or transfer it to your PC. Never dispose of
the battery by incineration. Do not attempt to disassemble or
short-circuit the battery pack. For safety, do not handle a
damaged or leaking battery.
To Next Page
Loading...
