Need help?Do you have a question about the Geeetech A20M and is the answer not in the manual?
General| Printing Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Build Volume | 255 x 255 x 255 mm |
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Print Speed | 100 mm/s |
| Max Bed Temperature | 100°C |
| Connectivity | SD Card, USB |
| Frame Material | Aluminum |
| Number of Extruders | 2 |
| Bed Leveling | Manual |
| Power Supply | 24V/15A |
| Machine Dimensions | 442 x 447 x 480 mm |
| Supported Materials | PLA, ABS, Wood, PVA, HIPS |
| Print Bed | Heated |
| Display | LCD |
| Max Nozzle Temperature | 250°C |
To Previous Page
