Geeetech A20T User Manual

31
SHENZHEN GETECH TECHNOLOGY CO., LTD
English interface for your reference (picture 8-5).
(Picture 8-5)
Using the Repetier-Host for the first time, printer parameters need to be configured before
connecting. Click “Printer settings” on the top right corner, see picture (8-6).
(Picture 8-6)
The following window pops up, and you can fill in according to the contents of the label. (Pay
attention to the highlighted parts)
a. Connection dialog：see picture (8-7)

Geeetech A20T Specifications

General

Brand	Geeetech
Model	A20T
Category	3D Printers
Language	English