43
SHENZHEN GETECH TECHNOLOGY CO., LTD
(Picture 8-29)
8.4 TF card printing
When all parameters are set, click “Save for SD print”. It will pop up a dialog as picture below
(See picture 8-30) and then click the save button to generate a .gcode file. Copy the gcode file to
the TF card.
(Picture 8-30)
Insert the TF card into the TF card slot on the right side of the machine. Press the knob to enter
the main menu and choose “Print from SD”. See picture (8-31).Choose the corresponding gcode
file to start printing.
To Next Page
Loading...
