Geeetech A20T User Manual

42
SHENZHEN GETECH TECHNOLOGY CO., LTD
(Picture 8-27)
(Picture 8-28)
You can find the model information such as estimated print time, the amount of filament needed,
etc. Click “Print” to start USB printing. Refer to picture (8-29).
The printer will heat to the target temp and then start printing. Under high temperature, the
filament will flow out of the nozzle, which is normal. You can use tweezers to clean up the
residual material of the nozzle.

Geeetech A20T Specifications

General

Brand	Geeetech
Model	A20T
Category	3D Printers
Language	English