Geeetech A30T User Manual

Shenzhen Getech Technology Co.,Ltd
31
（Picture 7-22）
5) If you click “Yes”, it will restore factory settings. See picture (7-23).
（Picture 7-23）
6) Click “Detector “to its interface. See picture (7-24).
（Picture 7-24）
There is no display at printing interface if no opening. Only printing interface opens, it shows
filament. When the picture is green, it can test filament. When the picture is red, it cannot test
filament. See picture (7-25), (7-26).

Geeetech A30T Specifications

General

Brand	Geeetech
Model	A30T
Category	3D Printers
Language	English