156
(4) Install auxiliary console rear assembly
(5) install the parking brake handle bushing
Parking brake cable
Components
Replacement
1. Remove parking brake control lever boot
2. Remove auxiliary console rear assembly
3. Remove left, right parking brake cable assembly
(1) loose the adjusting nut. Separate left, right parking brake cable and parking brake control lever
assembly
(2) remove parking brake cable retaining clip
(3) remove the rear wheel
(4) remove the brake drum
(5) remove the parking brake cable from parking brake swing arm in the rear brake
4. Install the left, right parking brake cable assembly in the reverse order of the removal
Notice: check the parking brake handle stroke. Re-adjust the parking brake handle
stroke as specified in adjustment.
Pull Rod
Equalizer
M6 x 16
Adjusting Nut
Parking
Brake Cable
Body Clip
Rubber Ring
M6 x 16 Bolt Compo.
Adjusting Nut
To Next Page
Loading...
Need help?
General
