348
(XIV) Rear trunk Inside Trim
Rear trunk inside Trim Diagram :
Rear trunk Inside Trim Diagram
1. Right Rear Quarter Trim 2. Left Rear Quarter Trim 3. Lower Rear Board Trim Assembly
4. Spare Tire Press Plate Assembly 5. Rear trunk Stuck Plate6. Right Rear Combination Lamp Access
Hole Cover 7. Left Rear Combination Lamp Access Hole Cover 8. Rear Partition Inside Trim
9. Rear trunk Miscelleaneous Box10. J-Clip ( Rear Quarter Trim ) 11. Right Outside
Sound Insulator 13. Right Rear Wheel-
house Sound Insulator 14. Right Rear Wheelhouse Sound Insulator 15. Right Speaker Grill
16. Left Speaker Grill 17. Rear Damper Cover
1. Removal
1 Remove the connector and remove the high mounted stop lamp;
2 Remove C pillar upper inside trim;
3 Remove the rear partition inside trim ;
4 Remove the right speaker grill and left speaker grill with a cross screwdriver;
5 Remove the lower rear board trim assembly clip with opener. Remove the lower rear board trim assembly;
6 Remove the right rear combination lamp access hole cover, left rear combination lamp access hole cover
7 Remove the clip installed at the left and right rear quarter trim with a cross screwdriver;
8 Remove the clip installed at the left and right rear quarter trim with an opener;
9 Remove the rear damper cover;
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
12. Left Outside Wheelhouse
Wheelhouse
Sound Insulator
To Next Page
Loading...
Need help?
General
