page | 68
9. The time block for Sunday has now been changed to 10:00 am - 5:00 pm.
Next, we need to change the change the Screen-off time. The Screen-off time block
is used to turn the display off.
10. Click the Sunday Screen-off time block from 20:00 through 23:00. The time block will
be outlined in red.
Signage Manager Express Software
Using Weekly Schedules
NOTE: Both the Digital Signage Player with Wi-Fi and Digital
Signage Player with Wi-Fi Plus supports the CEC protocol when the
Screen-off event is sent. The Digital Signage Player with Wi-Fi Plus
supports both CEC and RS-232 when sending the Screen-off event.
CEC is the recommended method of sending the Screen-off event.
Only the ON or OFF commands are supported.
To Next Page
Loading...
