Need help?Do you have a question about the Gefen TOOLBOX and is the answer not in the manual?
Lists multi-format video output, timings, patterns, and connectivity options.
Details of the LCD display, IR window, and control panel.
Explanation of each port and connector on the rear panel.
Details of timing, pattern, output, and indicator buttons.
Details of HDCP, audio, color, and bit depth selection buttons.
Visual representation of device connections.
Describes the 16-character, 2-line display.
Controls for cycling through timings and patterns.
Procedure to reset device to factory default settings.
Analyzing EDID data of connected sink devices.
Displays HDCP information and handshaking status.
Configuration for EDID, IR address, and system settings.
Step-by-step guide for installing the HD-SIGGEN software.
Instructions for connecting the signal generator to a PC.
How to launch and establish a connection with the software.
Choosing and applying video timing resolutions via software.
Choosing and applying video patterns via software.
Reading, writing, and managing EDID data.
To Next Page
General