gefran GFX4 User Manual

2
80395G_MHW_GFX4_09-2010_ENG
1 • PRELIMINARY INSTRUCTIONS
The section contains general information and warnings
to be read before installing, configuring and using the
controller..
1.1 G
eneral Description
GFX4 is an extremely compact, independent unit for separate
control of 4 zones, complete with communication interface in all
popular fieldbus standards.
It offers an exclusive combination of performance, reliability,
and flexibility. In particular, this new line of Gefran controllers is
the ideal solution for sectors demanding high performance and
continuity of service, such as:
• extrusion lines
• plastics injection presses
• thermoforming machines
• packaging and packing machines
• etc.
Series GFX4 controllers are based on an extremely versatile
hardware and software platform, with options to select the best
I/O configuration for your system.
Attention: the description of programming and
configuration parameters are contained in
the “Programming and configuration” manual,
downloadable from the website www.gefran.com
1.2 P
reliminary instruction
Read the following preliminary instructions before
installing and using the GFX4 modular power
controller.
This will make start-up faster and avoid some
problems that could be mistakenly interpreted as
malfunctions or limitations of the controller.
Immediately after unpacking the unit, check the order code
and the other data on the label attached to the outside of the
container.
Write them on the following table.
This data must always be available and given to Gefran
Customer Care representatives if technical service is needed.
Check that the controller is in perfect condition, was not
damaged during shipment, and that the package also contains
the “Configuration and Programming” manual.
Immediately report any errors, shortages, or signs of damage to
your Gefran dealer.
Check that the order code matches the configuration requested
for the intended application by consulting the section:
“Technical-Commercial Information.”
Example: GFX4 30 - D - 2 - F
Model
Total controlled power 30KW
Outputs 5...8 logic type
4 current transformers
Fuse holders present
See paragraph 2.1 “ Dimensions and mounting” before installing
the GFX4 controller on the machine/host system control panel.
In case of PC configuration, make sure you have the
WINSTRUM Kit.
For the order code, see Section 7 “Technical-Commercial
Information”.
Users and/or system integrators who want detailed
information on serial communication between
Gefran standard and/or industrial PCs and Gefran
Programmable Instruments can access Technical
Reference Documents on serial communication and
MODBus protocol, etc., in Adobe Acrobat format on
the Gefran website www.gefran.com:
• Serial Communication
• MODBus Protocol
Before calling Gefran Customer Care in case of assumed
malfunctions, please see the Troubleshooting Guide in the
“Maintenance” section and, if necessary, the F.A.Q. (Frequently
Asked Questions) section on the Gefran website
www.gefran.com
SN ............................... (Serial Number)
CODE ......................... (Product code)
TYPE........................... (Order code)
SUPPLY...................... (Type of electrical power supply)
VERS. ......................... (Firmware Version)
2 / 35

gefran GFX4 Specifications

General

Brand	gefran
Model	GFX4
Category	Controller
Language	English