12 917334/BP0310
ISO-Style (used Internationally)
Safety Decals inside the ROPS/FOPS
A – Crush hazard: Keep out from under lift arm unless lift arm is supported.
B – Crush hazard: Keep hands, feet and body inside cab when operating.
C – Forward tip hazard: Fasten seat belt. Carry load low. Do not exceed Rated
Operating Load.
D – Side tip hazard: Avoid steep slopes and high speed turns. Travel up and down
slopes with heavy end uphill.
Safety alert: Read Operator’s
Manual and all safety signs
before using machine. The
owner is responsible to ensure
all users are instructed on safe
use and maintenance.
137842 – Located on manual
storage box
137847 – Part of left
instrument panel
Safety alert: Always follow
“Mandatory Safety Shutdown
Procedure” in Operator’s Manual.
1 – Lower equipment to ground.
2 – Reduce throttle, stop engine.
3 – Apply parking brake; remove
key.
4 – Check safety interlocks.
137849 – Part of
left instrument
panel
Safety alert:
A – Check machine before
operating; Service per Operator’s
Manual. Contact dealer (or
manufacturer) for information and
service parts.
B – Maintain 3-point contact during
entry and exit.
C – Inspect work area. Avoid all
hazards. Look in direction of travel.
Keep children and bystanders away.
D – Start and operate machine only
from seat.
E – Keep away from power lines;
avoid contact.
F – Wear any needed Personal
Protective Equipment. Do not wear
loose clothing while operating or
servicing machine.
AB
C
D
E
F
137843 – Located on operator’s lower left side
ABCD
To Next Page
Loading...
