20 917334/BP0310
Rear Window Emergency Exit
The ROPS rear window has three func-
tions: noise reduction, flying objects bar-
rier and emergency exit.
To use the emergency exit, pull on the
yellow warning tag at the bottom of the
window and remove the seal. Push out the
window and exit.
Lift Arm Support Device
The lift arm support device on the left lift cylinder is used as a cylinder lock to
prevent the raised lift arm from unexpectedly lowering. Be sure to engage the
support device when the lift arm is raised for service. When the support device is
not being used, store it under the lift arm using the lock pin. The support device is
a safety device that must be kept in proper operating condition at all times. The
following steps ensure correct usage:
The safest method of engaging the lift arm sup-
port device requires two people – one person
inside the loader and another person to engage the support device.
Note: With the keyswitch OFF and the solenoid valve working, the lift arm will
stay raised when the lift control is moved to lower the lift arm. If the valve does
not hold the lift arm and it begins to lower, do not leave the operator’s compart-
ment. Instead, have someone store the support device for you. Then, contact your
Gehl dealer immediately to determine why the lift arm lowers while the keyswitch
is OFF.
Figure 3 Rear Window
Emergency Exit
1. Pull Tag
WARNING
To Next Page
Loading...
