54 917334/BP0310
Checking Tire Pressure
Correct tire pressure should be maintained for all tires to enhance operating
stability and extend tire life. Refer to the above chart for the proper inflation
pressure.
When installing tires, be sure they are the same size and style on each side of the
loader. Always replace tires with the same size as the original equipment.
Electrical System
Circuit Breakers
The circuit breakers for the loader are located on the right instrument panel.
There is also a 35-amp main circuit breaker located on the right side of the engine
compartment, directly behind the ROPS/FOPS.
Tire Size
Inflation Pressure
psi kPa
10 x 16.5 8-ply Heavy-Duty Flotation 60 414
27 x 8.5 –15 8-ply Heavy-Duty 60 414
27 x 10.5 – 15 8-ply Heavy-Duty 60 414
6.5 x 16 – 5.50 Solid Rubber - -
7.00-15 SS Chevron Narrow 8-ply 60 414
To Next Page
Loading...
