917334/BP0310 29
Hand/Foot Controlled Loaders
The right handle controls the direction of
oil flow. A locking pin locks it in the up
position for continuous operation.
Attachment Mounting
The Gehl loader is equipped with a
two-pin All-Tach™ attachment bracket
for mounting a bucket or other attach-
ment. Two latch levers secure the attach-
ment. Rotate the levers until they are hori-
zontal to engage the latch pins. Rotate the
levers until they are vertical to disengage
the latch pins.
To prevent unexpected attachment release
from the hitch, be sure to secure the lock pins
by rotating the levers downward into a horizontal position.
Figure 13 Hand/Foot
Auxiliary Control
Figure 14 All-Tach™
Attaching Mechanism (Hitch)
WARNING
To Next Page
Loading...
