Genesis GV80 User Manual

Driver assistance system
7-112
To turn on the function
Highway Lane Change Assist function
will turn on when the following
conditions are satisfied.
• The Driving Assist button or Lane
Driving Assist button is used to turn
on Highway Driving Assist.
•
OJX1070285LOJX1070285L
The OK button is pressed on the
steering wheel when a message on
the cluster inquires whether or not
Highway Lane Change Assist function
will be used.
)XQFWLRQUHDG\WRRSHUDWH
Whilst Highway Lane Change Assist
function is on, the system will be ready to
operate when all the following conditions
are satisfied:
• Highway Driving Assist is operating
• Lane Following Assist is operating
• A vehicle in the rear area of your
vehicle is detected more than once
after the engine is turned on
• Your vehicle speed is above 50 mph
• Hands-off warning is not displayed on
the cluster
• Hazard warning flasher is off
Information
• Whilst Lane Change Assist function
is turned on (indicator on), Lane
Following Assist will not cancel even
if the turn signal indicator or hazard
warning flasher is operating.
• Lane Change Assist function turns
off automatically when driven in the
following road conditions:
- One driving lane
- A road with a intersection or
crosswalk ahead
- A road with no structure, such as a
medium strip, guardrails, etc.
- There is a pedestrian or cyclist on the
road ahead
• When the function is in the ready state,
and vehicle speed is below 45 mph, the
function will change to the standby
state.
:$51,1*
:KHQ+LJKZD\/DQH&KDQJH$VVLVW
IXQFWLRQWXUQVRIIZKLOVWRSHUDWLQJ
VWHHULQJDVVLVWZLOOEHWHPSRUDULO\
FDQFHOOHG$OZD\VEHFDXWLRXVZKLOVW
GULYLQJ

Genesis GV80 Specifications

General

Brand	Genesis
Model	GV80
Category	Automobile
Language	English