2 10-1562 Issue 3-7 March 2014
Introduction
Genevac HT evaporation systems are designed to provide very high performance, coupled
with ease of use. They are simple to set up, easy to operate and very flexible.
The HT-24 Workstation occupies the minimum amount of laboratory space, comprising two
HT-8 or HT-12SII evaporators (or a combination of both) mounted on a workstation trolley
with the option of an integrated fume hood. The workstation also accommodates two
condensers, a high vacuum scroll pump and a waste solvent container.
Scroll pump & catch-pot
door open
Workstation front view
Two HT12-SII evaporators installed with optional fume
hood. Note: The fume hood has three sliding doors (not
shown) for easy access.
Waste solvent container
door open
The evaporators can be operated independently, one unit can operate while the other is
emptied and reloaded, or different solvents can be removed simultaneously in each
evaporator (providing waste solvents do not react within waste container).
To Next Page
Loading...
