10
Power LED
The Power LED is positioned on the right side of the IPCam
SECURE300’s lens while facing the IPCam SECURE300.
A steady blue light confirms that the IPCam SECURE300 is
powered on.
Link LED
The Link LED is positioned on the right side of the IPCam
SECURE300’s lens while facing the IPCam SECURE300. It is
located right of the Power LED
A steady orange light confirms that the camera has good
connection to LAN connectivity.
Dependent on the data traffic the LED will begin to flash to
indicate that the IPCam SECURE300 is receiving/sending data
from/to the network.
To Next Page
Loading...