83
B PING Your IP Address
The PING (Packet Internet Groper) command can determine
whether a specific IP address is accessible by sending a packet to
the specific address and waiting for a reply. It can also provide a
very useful tool to confirm if the IP address conflicts with the
IPCam SECURE300 over the network.
Follow the step-by-step procedure below to utilize the PING
command. However, you must disconnect the IPCam
SECURE300 from the network first.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the IPCam
SECURE300.
The succeeding replies as illustrated below will provide useful
explanation to the cause of the problem with the IPCam
SECURE300 IP address.
To Next Page
Loading...