90
E Xplug Control Installation
Installation To Web Server
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0. It must be
installed to a Public Domain with Fixed IP address.
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select “System” and
under the “Loading ActiveX From” input web server
location
(
http://www.web server location.com/).
Once the settings are completed, the user now is able to access the
IPCam SECURE300 from the web browser by selecting the
image view – ActiveX mode.
To Next Page
Loading...