94
F Adjust IPCam SECURE300
Focus
To adjust the focus of the lens, you need to turn the lens slowly in
either clockwise or anti-clockwise direction until the desired
image appears. DO NOT over turn the lens in either of the
directions as it will be out of focus.
Note:
You can further adjust the Wireless IPCam SECURE300's image
quality through System Administration – Image of Web
Configuration. Please refer to Web Configuration section for
further details.
Warning
Direct exposure to sunlight may cause permanent damage to the
CMOS sensor. Therefore do not expose the IPCam SECURE300’s
lens directly to sunlight. When operation is required in glaring
light environment, it is recommended to use an iris lens.
The IPCam SECURE300 is designed for indoor usage and if your
application requires prolong exposure to sunlight, a sun visor is
recommended to protect the IPCam SECURE300.
To Next Page
Loading...