96
Hardware Interface
LAN Connector: One RJ-45 port to connect to
10/100Mbps Ethernet, auto-sensed
LED Indicator: Power LED (Green)
Link LED (Yellow)
Note:
LED three mode setting can be changed by software. (Normal / Off /
Dummy)
Power Supply: DC 5V, switching type
Power Communication: 2.75 Watt (550mA x 5V)
Communication Support
Communication: 10/100Mbps Ethernet only
Communication protocol: HTTP, FTP, TCP/IP, UDP, ARP,
ICMP, BOOTP, RARP, DHCP,
PPPoE
Browser Support
System requirement:
CPU: Pentium II, 266 MHz or above
Memory Size: 32 MB (64 MB recommended)
VGA card resolution: 800x600 or above
• Internet Explorer 5.0 or above
• Netscape 6.0 or above
Note:
ActiveX Mode –View Image supports Internet Explorer under Windows
OS.
IPView SE Application
Support OS: Win 98 SE, Win 2000, Win Me, Win XP
System requirement for IPView:
CPU: Pentium III, 450 MHz or above
Memory Size: 128 MB (256 MB recommended)
VGA card resolution: 800x600 or above
To Next Page
Loading...