Operator Manual
Programming 3.3 © Genmega 2011
3.1.2 WHEN AN ERROR OCCURS
Step 1
From this screen, press (OP) Operator Menu, to
access the Main Menu.
Dev. Ini. Will reinitialize the machine and reboot.
Step 2
“ENTER PASSWORD” will be displayed. Enter the
Master, Service or Operator Password to continue.
Contact your distributor for default passwords.
Remember to press the ENTER key after typing
password!
Step 3
NOTE: If the machine goes out of service, the error
code will not always appear on the screen. If you
do not see an error code, enter operator function
and go to reports.
Look in the error summary for error codes.
To Next Page
Loading...
Need help?
General