Operator Manual
Operation 4.17 © Genmega 2012
4.3 SETTLEMENT MENU
Choose Settlement from the Operator Function menu. This menu controls how many bills have
been added to the ATM as well as generating Day total and Cassette total reports.
ADDING CASH
Step 1
Press the Add Cassette button.
Step 2
Using the main keypad, enter the number of bills added to the cassette (not the amount of
money).
Step 3
Press the enter key when finished to set the amount.
If you make a mistake and wish to zero out the current number of bills, you’ll need to press
Cassette total to do this. Anytime you press Add Cassette you will be adding on to the current
number of bills already programmed.
For example:
There are 50 bills in the cassette and in the settlement menu it says Current # of Bills = 50. You
wish to add 25 more bills to the same cassette, you press Add Cassette, then type 25 from the
keypad and press enter. The current number of bills will now be 75.
Now say there are 50 bills in the cassette and in the settlement menu it says Current # of Bills =
50. If you wish to remove 25 bills from the cassette, press Cassette Total. This will return the
number of bills in both cassettes to zero and print a receipt showing remaining bills and loaded
bills. Now press Add Cassette and enter 25 from the keypad, press enter to set. The current
number of bills will now be 25.
To Next Page
Loading...
Need help?
General