Genmega G2500 series - Closing the Security Door

Operator Manual
Operation 4.2 © Genmega 2012
4.1.2 Closing the Security Door
Step 1
With the security door handle turned counter-
clockwise, close the security door and turn the
security door handle clockwise until it is locked. The
electronic lock mechanism will lock itself once the T-
handle has returned to its vertical position. The dial
combination lock must be turned counter-clockwise
to lock.
Step 2
Check the T-handle to make sure the lock has
locked itself.
Step 3
With the security cover key turned clockwise, close
the security cover and turn the security cover key
counter-clockwise until locked. Remove the key
when it is locked.