Operator Manual
Customer Transactions 6.8 © Genmega 2011
6.5 CLOSING PROCEDURE
This section explains the closing procedure for the ATM.
Step 1
Perform the “DAY TOTAL” and “CASSETTE TOTAL” functions in the “OPERATOR FUNCTION
MODE.”
Step 2
Open the security door. Remove the cash from the Cash Cassette and Cash Reject bin.
Step 3
Print the Journal.
Step 4
If the result of the DAY TOTAL and CASSETTE TOTAL does not match the amount counted in
the Cash Cassette, refer to the Journal for verification.
Step 5
Turn the power off and close the security door.
To Next Page
Loading...